Si Novelties Stainless Steel Shower Bidet System with Two Heads

The Si Novelties Stainless Steel Shower Bidet System, sold as Rinservice, turns your shower into a rinse station for anal douching. It's a shower enema setup with a stainless steel nozzle head, a second interchangeable head, a hose and a wall mount, so you can rinse with warm running water instead of refilling a bulb. If you clean out before anal play regularly, plumbing a system into the shower is far quicker than squeezing a bulb over and over.

What's in the box

You get the stainless steel nozzle system with two interchangeable heads in different sizes, a flexible hose, a valve to control the water, and a wall mount to hang it up when you're done. The steel is non-porous and rigid, so it's easy to clean and doesn't absorb anything between uses.

Setting up a shower enema system

The system connects to your shower's water supply through its valve, so plan for a little plumbing. Before you start, look at how your shower head attaches to the arm. Si Novelties doesn't publish thread specifications, and one buyer reports needing a hardware-store adapter to fit a North American shower arm, so take the valve with you if you visit a plumbing store. Mount the holder within easy reach at roughly hip height.

Using it, step by step

Start with the smaller head. Set the shower to lukewarm and check it on your wrist; it should feel neutral, never hot. Turn the valve slowly, as the maker advises, so pressure builds gently in the hose. Lube the nozzle, then insert it a short way while breathing out. Let a small amount of water in, a few seconds' worth, then remove the nozzle and release over the toilet. Repeat until the water runs clear, usually two to four rounds. Use low pressure throughout; strong pressure is uncomfortable and pushes water further than you need. Give yourself time afterwards, around 20 to 30 minutes, for any leftover water to come out before play.

Choosing between the two heads

The smaller head is easier to insert and gives more control, so most people begin there. The larger head lets water in more quickly and may feel more secure once you're used to the process. Swap them only when the water is off and the hose has drained.

How it compares with a bulb douche

A bulb is cheap, portable and needs no installation, but you refill it for every round. A shower bidet keeps going for as long as you need and keeps the water at a steady temperature. The trade-off is setup time and the fact that it stays in one bathroom.

Cleaning and storage

After each use, run clean water through the heads, then wash them with warm water and mild soap or a toy cleaner. Unscrew and dry each head before putting it away. Let the hose drain, then hang the system on its wall mount or store it in a clean bag.

Specifications

• Brand: Si Novelties, Rinservice shower bidet
• Material: stainless steel
• Heads: 2 interchangeable, different sizes
• Includes: hose, valve and wall mount
• Connection: to shower water supply; adapter may be needed for some fittings

Getting ready for anal play? Read our anal play tips, browse more douches and enemas, or pick up an anal lube.