XR 5X Sucking Penis Pump with Stroker Sleeve

The XR 5X Sucking Penis Pump is an electric penis pump that doubles as a stroker. You start with a clear cylinder and a silicone seal, let the motor draw a gentle vacuum at the press of a button, and then swap the seal for a textured TPE sleeve so the same suction holds a masturbator in place. It suits someone who likes the slow, building pull of a pump but doesn't want a hand pump, a separate stroker and two sets of parts to clean.

How the five suction modes work

The motor sits at the closed end of the cylinder and is run by buttons on its cap, so there's no bulb to squeeze and no hose to manage. XR lists five suction modes. Start on the lowest, watch how the skin responds through the clear wall, and only move up once that level feels comfortable. Pressure that feels mild at first can build quickly, so give each setting a minute before changing it. If anything pinches, goes numb or turns an unusual colour, stop and let the air back in.

Getting a good seal with the silicone sleeves

Two silicone seals come in the box, with 20 mm and 25 mm openings. The narrower one grips more firmly and suits a slimmer shaft; the wider one is easier to slide through and suits more girth. A small dab of water-based lube around the base of the shaft and on the inside edge of the seal helps it close properly. If you hear air hissing in, the seal is either too wide or sitting on hair, so trim or switch sizes rather than turning the suction up.

Switching to the stroker sleeve

The second half of the kit is a realistic vulva-style sleeve in soft, stretchy TPE with a textured inner tunnel. XR's method is to fit it to the cylinder with the opening facing out and use the suction to pull it snugly into place. Add more lube to the tunnel and you have a handheld masturbator with a hard shell to hold. The sleeve has about 4.25 inches of usable depth, much shorter than the 7.5-inch cylinder, so expect a snug, shallower stroke rather than full-length coverage.

Who will like it, and who won't

This kit fits someone curious about pumping who likes having a built-in stroker for the second half of a session. If a pump is all you want, a dedicated cylinder with a hand bulb gives finer control over each increment; browse our penis pumps for those. If you mainly want a sleeve, a standalone toy from strokers and sleeves will be longer and more textured. This pump is not a medical device and XR makes no size claims for it.

Water, lube and cleaning

XR rates the pump IPX7, so it can go in the shower or under bath water for up to 30 minutes. Use water-based lube only, as XR recommends. After use, detach the motor and wipe it with a damp cloth and toy cleaner; wash the cylinder, both seals and the TPE sleeve in warm water. TPE holds moisture, so pat the sleeve dry and let it air out fully before storing it away from other toys and out of direct sun. The motor detaches for charging.

Specifications

• Brand: XR
• Pump: 11 x 2.6 in overall, 7.5 in insertion length, 2.2 in opening diameter
• Sleeve: 4.3 x 3.1 in, about 4.25 in insertion length
• Seal openings: 20 mm and 25 mm
• Materials: ABS plastic and silicone (pump and seals), TPE (sleeve)
• Suction: 5 modes, button controlled
• Water rating: IPX7, submersible up to 30 minutes
• Power: rechargeable, detachable motor
• Colour: black and clear

Comparing options for him? Our male sex toy guide covers pumps, strokers and more, and the full XR range is here too.