Popular searches
Trending now Best sellers
Shop by category
The OXBALLS Bonemaker 3-Pack is a set of three different cock ring styles in black, so you can find the grip you like without buying three separate rings. There's a treaded ring that won't roll, a rippled ring with a ball-lifting flange and a smooth ring that holds tight. All three are moulded from Flextpr, OXBALLS' soft and very stretchy material. The set suits first-timers who want to experiment and regular ring wearers who like to switch things up or stack.
The point of a set is finding out what you actually like, and these three are genuinely different from one another.
TRUCKT is the treaded ring: the tallest of the three at about 0.9 inch, with a ribbed, tyre-like surface that resists rolling. That height and texture make it a good shaft ring and the one OXBALLS suggests for stacking behind the balls. 6-PACK is rippled, thicker on one side (0.75 inch) than the other (0.5 inch), and has a flange that sits under the balls to lift them forward. The smooth ring is the slimmest, about 0.5 inch tall, and has the narrowest opening of the three, so it's the one that grips tightest. OXBALLS calls these "fuckrings" because they're made for harder play, solo strokes and pumping sessions as much as for partnered sex.
At rest, the smooth ring has a 0.75-inch inside diameter and a 2-inch outside diameter. The ribbed 6-PACK has a 1-inch inside diameter and a 2-inch outside diameter, and the treaded TRUCKT a 1-inch inside diameter and a 1.75-inch outside diameter. Those openings look tiny on paper, but Flextpr stretches a long way, which is how a single size fits most bodies. Expect the smooth ring to feel the tightest and the two 1-inch rings to feel more relaxed. Each weighs well under an ounce, so none of them drags.
Fit any of them while you're soft or only partly hard. Put a little lube inside, stretch the ring open with your fingers and slide it to the base of the shaft for a shaft ring. To wear one as a cock and ball ring, ease one testicle through, then the other, then fold the shaft through, so the ring sits behind everything. With the 6-PACK, keep the flange underneath. Once you know how one ring feels, try two: TRUCKT around the balls and the smooth ring on the shaft is a popular combination. Keep sessions to around 20 to 30 minutes and take them off right away if you feel numbness, coldness or pain.
Flextpr is OXBALLS' own blend: soft, rubbery and very stretchy, made to grip without pinching. It's phthalate-free and unscented. OXBALLS recommends water-based, hybrid or silicone lube, and says oil-based lube isn't recommended. After use, wash the rings in warm, soapy water and let them air-dry. Store them separately, ideally in breathable cloth pouches, since some toy materials can react when they rest against each other for long periods.
Shop more from OXBALLS, see our full range of cock rings, or check our ring sizing guide.
Helpful answers about OXBALLS Bonemaker 3-Pack Cock Ring Set – Black.
A cock ring sits around the base of the penis, or around the penis and testicles, and gently slows blood flowing back out. Wearers of rings like the OXBALLS Bonemaker set describe a tighter, fuller and more sensitive feeling. Rings with a flange, like the 6-PACK, also lift the balls forward.
Start with the TRUCKT or 6-PACK from the Bonemaker set. Both have a 1-inch inside diameter, so they feel looser than the smooth ring at 0.75 inch. Once you know how one feels, move to the smooth ring for a tighter grip or combine two.
Wrap a soft tape or a strip of paper around the base of the shaft, or behind the balls for a cock and ball ring, and note the length. With very stretchy rings like the Bonemaker set, exact sizing matters less. Our guide to ring styles explains the different styles.
Yes. OXBALLS designed the Bonemaker rings to be worn alone or together, and TRUCKT is made for stacking on the balls. A common setup is TRUCKT behind the balls and the smooth ring on the shaft. Two rings feel much tighter, so shorten your wear time.
Yes. OXBALLS says the Bonemaker rings are made for pumping as well as solo and partnered play. Stretch a ring over the pump cylinder opening first, then slide it off onto the base once you've finished pumping. Remove it within 20 to 30 minutes.
OXBALLS recommends water-based, hybrid or silicone lube for the Bonemaker rings, and says oil-based lube isn't recommended. A drop inside the ring is enough to help it slide on and off without tugging skin or hair.
Wash the Bonemaker rings in warm, soapy water after use and let them air-dry fully. OXBALLS suggests storing each ring separately in a breathable cloth pouch, because some toy materials react when they touch for a long time.
Expert guidance to help you choose, use and care for your products with confidence.