Popular searches
Trending now Best sellers
Shop by category
The OxBalls Bonemaker 3 Pack is a cock ring kit with three different clear rings: one smooth, one ribbed with a ball flange, and one thick, treaded ring. All three are made from OXBALLS' super-stretchy Flextpr, so this set suits anyone who wants to try different grips and fits, and experienced guys who like to stack rings for a bolder look.
OXBALLS chose three of its rings for this kit, and each one holds differently. The smooth ring is the snuggest of the three, a simple, plain band with the smallest opening, made for a tight grip around the shaft. The ribbed ring, based on OXBALLS' 6-Pack, is rippled and has a ball flange: one side is taller than the other, so it lifts and pushes the balls forward when worn around the whole package. The treads ring, from the Truckt design, is the thickest, with a grippy, ribbed surface that resists rolling and works well around the shaft or stacked on the balls. Wear one at a time, or combine two, such as treads behind the balls and smooth around the shaft.
All three are made from Flextpr, OXBALLS' own soft, rubbery and very stretchy blend. It opens wide enough to get over the balls and then closes back with a firm, even grip that doesn't bite into the skin. The material is phthalate-free with no scent. Because it stretches so much, these rings work for harder play, for jerking off, or after pumping, when you want a reliable hold.
The smooth ring has an inside diameter of 0.75 inch (20 mm); the ribbed and treads rings open to 1 inch (26 mm). OXBALLS lists an inside circumference of 2.5 inches for all three before stretching. As a rough guide, start with the larger rings if you're new or want to wear one behind the testicles, and save the smooth ring for the shaft once you know how much squeeze you like. Our cock ring size guide explains how to measure yourself.
Fit any ring when you're soft. Add lube inside, stretch it with your fingers and roll it to the base of the shaft, or, for a cock and ball ring setup, pass one testicle through, then the other, then the shaft. It should feel snug, never painful. Keep sessions to around 20 to 30 minutes, and take the ring off straight away if you feel numbness, coldness or pain, or notice the skin changing colour.
OXBALLS recommends water-based, hybrid or silicone lube with Flextpr and advises against oil-based products. Wash the rings in warm, soapy water after use and let them air-dry. Store them in a breathable cloth pouch, apart from other toys.
See the full OXBALLS range or our complete cock rings collection.
Helpful answers about Oxballs Bonemaker Cock Ring - 3 Pack (Clear).
The OxBalls Bonemaker 3 Pack has three clear Flextpr rings: a smooth ring with a 0.75-inch opening, a ribbed ring with a ball flange, and a thick treads ring, both with 1-inch openings. Each grips differently, so you can match the ring to the kind of play.
Use one of the Bonemaker's larger rings, the ribbed or treads one. While soft, lube the inside, pass one testicle through, then the other, then bring the shaft through so the ring sits behind everything. The ribbed ring's flange lifts the balls forward in this position.
Start with the treads ring. Its 1-inch opening and thick, grippy body give a secure hold without too much squeeze. Move to the ribbed ring for ball lift, and try the smooth ring, the tightest at 0.75 inch, only once you know you like a firm grip.
Yes, the Bonemaker rings stack well. A common setup is the treads or ribbed ring behind the balls with the smooth ring around the base of the shaft. Put on the ball ring first, then the shaft ring, and keep the total wear time short until you know how it feels.
Yes. OXBALLS recommends water-based, hybrid or silicone lube with its Flextpr rings, and says not to use oil-based lube. Silicone lube is handy for rings because it stays slippery longer, making them easier to put on and take off.
Around 20 to 30 minutes is a sensible limit, especially with the tight smooth ring. Take a Bonemaker ring off right away if you feel numbness, coldness or pain, or see discolouration. Never sleep in one, and if a ring is hard to remove, stretch it open slowly.
Both are three-ring kits. The Bonemaker gives you detailed inner sizes and three distinct grips, including a ball flange, in OXBALLS' stretchy Flextpr. The Zero Tolerance Triple Thick 3pk uses TPE in circle, hexagon and star shapes, with inner grooves and outer texture.
Expert guidance to help you choose, use and care for your products with confidence.