Cowgirl Bronco Realistic Silicone Attachment – Chocolate

The Bronco is a realistic dildo attachment made for The Cowgirl and The Unicorn riding machines, here in a warm chocolate shade. It has a defined head and raised veins along a shaft of moderate size: 4.5 inches you can insert and 4.8 inches around at the thickest point. That's a manageable size for a first machine attachment, and because the base also fits an O-ring harness, it doesn't sit idle when the machine is packed away.

How big this realistic dildo really is

A 4.8 inch circumference works out to roughly 1.5 inches across. The shaft narrows to 4.3 inches around near the base, so the widest part is up toward the head, where you feel it most on entry. With 4.5 inches of usable length, it's an average size rather than a challenge, which suits riders who want to get used to the motion of a machine without also adjusting to a big toy. Compare the numbers with a dildo you already own if you're unsure.

Riding with the machine

Lock the Bronco's base into the saddle's attachment point as your machine's manual describes, and check it's seated firmly. Coat the shaft generously with water-based lube and switch the machine on at its lowest setting before you sit. Lower yourself slowly, find the angle where the head presses where you want, then raise the speed in small steps. Letting a partner hold the remote and set the tempo is a playful way to hand over control without any restraint. If the angle feels off, lean forward or back rather than changing speed; small shifts in posture change where the head lands far more than the motor setting does.

Using it as a harness compatible dildo

The base also fits standard O-ring harnesses, so the Bronco doubles as a strap-on. The veining and head give a lifelike feel, and the moderate size is kind to a receiving partner who's new to strap-on sex. Push it through the O-ring from the front, tighten the harness so the base sits flat against the body, and use plenty of lube. Check your harness ring size; one that's too large lets the base wobble.

Silicone and lube

It's made of silicone, which is non-porous and easy to keep clean. Stick to water-based lube: silicone lubricant can soften or roughen a silicone toy's surface over time, and an attachment like this should last through many sessions. A thicker water-based gel also holds up better under the steady motion of a machine than a thin, runny liquid.

Cleaning

Take the attachment off the machine after each session. Wash it with warm water and a mild soap or toy cleaner, paying attention to the veins and the rim of the head, where lube collects. Rinse, let it air-dry fully, and store it away from other silicone toys and dust. Before refitting it, check the underside of the base for lube trapped where it meets the mount. Clean the machine's saddle separately, following its own instructions.

Specifications

• Brand: The Cowgirl
• Model: Bronco realistic silicone attachment
• Material: silicone
• Insertable length: 4.5 in
• Circumference: 4.8 in at widest, 4.3 in at base
• Fits: The Cowgirl and The Unicorn machines; standard O-ring harnesses
• Lube: water-based
• Colour: chocolate. Also in vanilla

See the full The Cowgirl range and other sex machines, or read our round-up of lifelike dildos.