Popular searches
Trending now Best sellers
Shop by category
The Blush Dr. Skin Glide 8.5" is a realistic suction cup dildo with balls and one unusual trick: add a little water and its surface turns slippery on its own. It's a lifelike, 2-inch-wide toy that sticks to smooth surfaces and fits an O-ring harness, and it suits anyone who likes the idea of a dildo that's ready to go in the shower without hunting for the lube bottle.
The surface of the Glide is treated so it turns slick when it meets water. Run it under the tap or wet your hand and rub it over the shaft, and within a few seconds it has a smooth, slippery finish without any lube. That's handy in the shower, where bottled lube washes away, and for quick sessions when you don't want to reach for a bottle. The effect is temporary. Blush says it lasts for up to 12 uses, after which the toy works like any other TPE dildo and needs water-based lube.
Even while the coating is fresh, you can add lube if you want more glide. Stick to water-based formulas, and plan to switch to them fully once the slipperiness starts to fade. You can tell the coating is wearing thin when water no longer makes the surface feel slick after a few seconds of rubbing. Count your sessions loosely, and keep a bottle of water-based lube nearby from around the tenth use so the change doesn't catch you mid-session.
Dr. Skin is Blush's realistic line, and the Glide follows the brief: a defined head, a detailed shaft and full balls at the base. The balls do more than look the part. They give you something to hold during hand use and act as a buffer that stops you taking more length than you want. The TPE is soft at the surface with enough firmness underneath to give real pressure, and it warms quickly to body temperature in your hand.
It measures 8.5 inches long and 2 inches wide. The length includes the balls and the suction base, so the part you can actually use is shorter. Two inches is a generous width, wider than most starter dildos, so it suits people who already enjoy a fuller stretch. Newer users should warm up with fingers or a slimmer toy, go slowly with the head, and treat full depth as something to work toward rather than a goal for the first session.
The suction cup holds to any smooth, flat surface. Press it firmly onto a clean tile wall, a glass shower screen or a smooth chair seat, ideally slightly damp, and it's ready for riding or hands-free thrusting. The same base fits O-ring strap-on harnesses. Pick a ring sized for a 2-inch shaft so it holds the base snugly without pinching, and test the fit before the moment it matters.
Explore more from Blush, browse our realistic dildos, or see our round-up of the most realistic dildos.
Helpful answers about Blush Dr. Skin Glide 8.5" Self-Lubing Realistic Dildo with Balls.
The Dr. Skin Glide becomes slippery when wet, so you don't need lube at first. Wet the shaft, rub lightly and it's ready. Blush says the self-lubricating effect lasts up to 12 uses, after which you'll need water-based lube every time.
The Dr. Skin Glide is 8.5 inches long and 2 inches wide, measured with the balls and base, so the usable length is shorter. Two inches is a fuller width than most beginner toys, so take your time with the head.
Yes. The Dr. Skin Glide fits O-ring strap-on harnesses. The balls sit in front of the ring and the base behind it, which helps it stay put. Choose a ring that fits a 2-inch shaft snugly so the dildo doesn't tilt during thrusting.
Yes, the shower is where the Dr. Skin Glide shines. Water activates its slippery coating, and the suction cup grips wet tile or glass well. Press it on firmly, test the hold with your hand, and rinse it under the tap afterwards.
Only water-based lube with the Dr. Skin Glide. Start adding it once the self-lubricating effect fades, usually after around 12 uses, or sooner if you want extra slip. Browse our water-based lubes for thicker formulas.
Yes. The Dr. Skin Glide is made of TPE with no latex, phthalates, paraffins or synthetic fragrance. That suits people avoiding latex, though TPE is slightly porous and needs thorough washing and drying after each use.
Wash the Dr. Skin Glide with soap and water after each use, then pat it dry and let it air-dry completely before storing. Keep it in its own pouch, since TPE can pick up colour and lint from other toys and fabrics.
Expert guidance to help you choose, use and care for your products with confidence.