Popular searches
Trending now Best sellers
Shop by category
The Master Series Locked Cock is a stainless steel cock and ball ring set that locks together with a small gold key. A ball ring sits behind the scrotum, a separate cock ring goes over the shaft, and a locking pin joins the two so the set stays in place until you choose to unlock it. Two ball ring sizes come in the box, and the cool, weighty steel adds a feeling of firmness and control that soft silicone rings don't.
The cock ring slots into the ball ring of your choice, and a gold locking pin pushes through both into a keyhole built into the steel. Turn the key clockwise and pull it out, and the pin stays fixed. To release, put the key back in, turn it counter-clockwise and draw out the key and pin together. There's no padlock dangling from it, just a small, neat mechanism. Keep the key somewhere you can reach easily for the whole session; losing it is the one thing that would turn the fun into a problem.
The cock ring has a 1.25-inch inner diameter. For the scrotum, you get two ball rings: 1.75 inches and 2 inches inside. Most people should start with the larger 2-inch ring, since steel has no stretch and a ring that's too small becomes uncomfortable quickly. If it feels loose and slides, try the 1.75-inch one next time. Measure around the base of your penis and scrotum together when soft to get a sense of fit, and compare with our sizing guide before buying other steel rings.
Put it on while soft or semi-flaccid, with a little lube on the skin and the steel. Slip one testicle through the ball ring, then the other, then guide the shaft through. Next, slide the cock ring over the head of the penis and down to meet the ball ring, line it up with the locking pins, and lock it with the key. It takes a few tries to get smooth at this, so practise once without any hurry, ideally in a warm room where your body is relaxed.
For your first sessions, wear it for no more than 30 minutes, and take it off at once if you feel numbness, coldness or pain. Steel can't be cut off as easily as silicone, so build up slowly.
Steel is non-porous and durable, and it works with every type of lube: water-based, silicone or oil. It's temperature sensitive too. Out of the box it feels cool, which some people love; for a warmer start, hold it under warm water for a minute and test it on your wrist. To clean, rinse in warm water with mild soap and spray with toy cleaner, or boil the rings in water for a deeper clean. Dry the lock and pin thoroughly afterwards.
Browse more cock rings and Master Series gear, or read our cock ring size guide.
Helpful answers about Master Series Locked Cock Locking Cock & Ball Ring Set.
Start with the 2-inch ball ring. Steel doesn't stretch, so the larger ring is the safer first try. If it slides around or feels loose, switch to the 1.75-inch ring next time. The cock ring is fixed at 1.25 inches inside.
Slot the cock ring into your chosen ball ring, push the gold pin fully into the keyhole, turn the key clockwise and remove it. To unlock, insert the key, turn counter-clockwise and pull out the key with the pin. Keep the key within reach.
Keep first sessions with the Locked Cock to 30 minutes or less. Remove it at once if you feel numbness, coldness or pain. Steel is rigid, so remove it at the first sign of soreness rather than waiting it out.
Any lube. The Locked Cock is non-porous stainless steel, so water-based, silicone and oil-based lubes are all fine. A little lube on the skin and rings makes it far easier to get on and off.
No. The Locked Cock locks a cock ring to a ball ring, but it doesn't cover the penis. It's a constriction toy with a power-play twist. For full chastity cages, browse our chastity collection.
Wash the Locked Cock in warm water with mild soap and spray it with toy cleaner, or boil the steel rings for a deeper clean. Dry everything carefully, especially the lock and pin, and store the key with the set.
Yes, at first. Stainless steel feels cool against the skin and responds to temperature. For a warmer start, run the Locked Cock under warm water for a minute and test it on your wrist before putting it on.
Expert guidance to help you choose, use and care for your products with confidence.