Flags Importer Non-Binary Pride Flag – 3' x 5' Polyester

For a balcony, a bedroom wall or a flagpole outside a community centre, this full-size non-binary flag from Flags Importer measures 3' × 5' and comes ready to hang from three metal grommets. The yellow, white, purple and black stripes are dye-sublimated into the polyester so the colour sits in the fibres rather than on top of them.

What the non-binary flag's stripes say

Created by Kye Rowan as a flag for non-binary people, the design runs from top to bottom: yellow for genders outside the binary, white for people with many or all genders, purple for a blend of male and female genders, and black for agender people. Flown large, it tells neighbours or passers-by plainly who lives or gathers there.

Wall, window or pole

Three grommets set in a header strip give you more ways to hang it than the usual two. On a pole, clip the top and bottom ones onto the halyard. Indoors, the middle grommet stops the header sagging when the flag is pinned to a wall above a bed or desk. In a window, hang it from a tension rod through the grommets. Because the print goes through from one side, the back shows a mirror image, which is standard for a single-layer flag.

Durability notes

Every edge is double-stitched and the fly end carries four rows, which is where flags usually start to fray. The maker lists it for indoor or outdoor display. Take it down in storms and dry it flat before folding to keep the fabric in shape.

Specifications

• Brand: Flags Importer
• Design: non-binary pride flag
• Size: 3 × 5 ft
• Material: 100-denier polyester, dye-sublimated, printed one side
• Hanging: header tape with 3 metal grommets
• Stitching: double-stitched edges, 4 rows on the fly edge
• Pole: not included

Short on wall space? Try the 2' × 3' non-binary flag, or carry the 12" × 18" stick version at Pride. More flags are in our Pride collection.