Popular searches
Trending now Best sellers
Shop by category
The Blush Performance VS4 is a silicone cock ring set with rings in three diameters, so you can find your size without buying several singles. Each ring is plain, smooth and stretchy, made from a high-tensile silicone that can open to a little over twice its resting size and then grip back. It suits first-time users who don't yet know their fit, and anyone who likes to stack rings around the shaft and balls.
Cock rings are hard to size before you've tried one, and the wrong fit is either uncomfortable or pointless. The VS4 set includes rings at 1.25, 1.75 and 2 inches inner diameter. Because the silicone stretches to about double, the numbers are a starting point rather than a hard limit: the smaller ring will feel very snug, the larger one more relaxed. Trying all three, at different times, is the quickest way to learn which tension you enjoy.
Most people start with the middle 1.75-inch ring around the base of the shaft. If it pinches or leaves red marks, move up to the 2-inch ring; if it slides around or rolls off, try the 1.25-inch. For a cock and balls ring, worn behind the testicles as well as around the shaft, you'll usually need the 2-inch size, since it has to fit around more. The right fit feels firm and secure, and you should still be able to get it off easily.
Put the ring on while soft or only partly hard. A drop of water-based lube inside the ring helps. For a shaft ring, stretch it open with two fingers and slide it to the base, or roll it down like a condom. For a cock and balls ring, ease one testicle through, then the other, then bring the shaft through and settle the ring behind the scrotum. To remove, roll it off or stretch it open again. Wear it for no more than 20 to 30 minutes at a time, and take it off at once if you feel cold, numbness, pain or see a colour change.
Because the set has three rings, you can wear more than one at once, for example the 2-inch ring around the cock and balls with the 1.25-inch around the shaft above it. Stacking adds pressure and a firmer feel, so build up gradually. The rings are plain, with no vibration, which keeps them thin and unobtrusive for a partner during sex. They also sit comfortably under a condom.
Blush makes the Performance rings from silicone with no added fragrance, phthalates, paraffins or latex, and the high tensile strength is there so they resist snapping when stretched. Wash them in warm water with mild soap or a toy cleaner after each use, then let them air-dry. Use water-based lube only, as silicone lube can degrade silicone over time.
Read our cock ring size guide, browse more cock rings, or see the full Blush range.
Helpful answers about Blush Performance VS4 Pure Silicone Cock Ring Set.
A cock ring sits at the base of the penis, or behind the balls too, and gently slows blood flowing back out. Many people find this makes things feel firmer and more sensitive. The Performance VS4 rings are plain and stretchy, so the effect is subtle and easy to adjust by changing ring size.
Wrap a strip of paper or soft tape around the base of the penis while soft, mark where it meets, and divide that length by 3.14 for the diameter. Compare it to the VS4 sizes, 1.25, 1.75 and 2 inches, and remember they all stretch to about double.
Start with the 2-inch ring for a cock and balls fit, since it needs to pass behind the scrotum as well as around the shaft. If it feels loose, you can try the 1.75-inch. Put it on while soft, one testicle at a time, then the shaft.
Put a Performance VS4 ring on before you're fully hard. Fitting it while soft or semi-hard is easier and more comfortable, and a little water-based lube inside the ring helps it slide. Trying to get a snug ring on at full firmness can pinch.
Keep it to 20 to 30 minutes, then take a break. Remove a VS4 ring straight away if you notice coldness, numbness, pain or skin changing colour. Never sleep in one, and roll or stretch it off rather than pulling.
Yes. A common stack is the 2-inch ring around the cock and balls with a smaller one on the shaft. Stacking adds pressure, so try one ring first, then add a second for short sessions once you know how your body responds.
Yes, a plain silicone ring sits fine with a latex condom. Put the condom on first, then roll the ring over it to the base. Use water-based lube, which suits both latex and the silicone rings.
Expert guidance to help you choose, use and care for your products with confidence.