Your Cart

🚚 Discreet delivery across Canada🎁 Free gift on $100+ orders

The Blush Performance VX1 is a motorized penis pump: a clear acrylic cylinder, a soft sleeve that forms the seal, and a motor unit that draws air out at the press of a button, so there's no hand-squeezing a bulb. A pressure release valve lets air back in when you're done, and a ring and a detailed safety manual come in the box. This page sets out what each part does and how to use the device carefully; it makes no claims about results.

The parts and what they do

  • Cylinder: clear acrylic, 8 in long and 2.5 in wide, with etched measurement markings along its length. Being transparent, it lets you see what's happening inside.
  • Soft sleeve: fits over the open end of the cylinder and rests against the body to make an airtight seal.
  • Motor pump: removes air from the cylinder when you press the button, creating suction inside.
  • Pressure release valve: lets air back in gradually so the vacuum eases before you remove the cylinder.
  • Ring: one ring included.
  • Manual: instructions and a user safety manual.

Overall length with the pump fitted is 11.5 in, and the cylinder accepts up to 8 in of length.

How a vacuum penis pump works mechanically

The sleeve presses against the skin at the base and seals the cylinder. When the motor runs, it pulls air out, lowering the pressure inside the tube compared with the air outside. That difference is the suction you feel inside the tube. Opening the valve equalises the pressure and releases the seal. A motor gives steadier, more even suction than a hand bulb, and it frees both hands to hold the cylinder in place.

Checking the fit

Fit comes down to the cylinder's width. The listing gives it as 2.5 in wide, so if you measure close to or wider than that, it won't be comfortable and a wider cylinder is the better choice. A good seal depends on the sleeve sitting flat against the skin, so trimming hair at the base and a little water-based lube on the sleeve rim help a lot.

Using it carefully

Read the safety manual before your first session; it sets the time limits and the order of steps. Start with short sessions and gentle suction, and build up slowly. Use the release valve every time instead of pulling the cylinder off under vacuum. Stop immediately if you feel pain, numbness or tingling, or see unusual discolouration. If you have a medical condition or take blood-thinning medication, ask a doctor before using any vacuum device. The ring should be removed within the time the manual specifies.

Cleaning and storage

Separate the sleeve from the cylinder after each use. Wash the sleeve and cylinder with warm water and mild soap, rinse well and air-dry. Keep water away from the motor unit and wipe it with a damp cloth only. Acrylic scratches, so avoid abrasive sponges, and store the parts together in the box.

Specifications

  • Brand: Blush, Performance collection
  • Model: VX1 motorized pump
  • Cylinder: clear acrylic, 8 in long × 2.5 in wide, etched markings
  • Overall length: 11.5 in
  • Accommodates: up to 8 in in length
  • Includes: motor pump, cylinder, soft sleeve, pressure release valve, 1 ring, instructions and user safety manual
  • Power source: not stated by the supplier

Compare other models in our pump collection or more from Blush.

Helpful Information

Frequently Asked Questions

Helpful answers about Blush Performance VX1 Motorized Penis Pump.

How does an electric penis pump differ from a manual one?

A manual pump uses a hand bulb or trigger that you squeeze to remove air. An electric penis pump like the VX1 does it with a motor at the press of a button, which gives steadier suction and frees your hands to hold the cylinder and keep the seal steady.

Will the VX1 fit me?

The cylinder is 2.5 in wide and accepts up to 8 in in length. If your width is close to 2.5 in or more, it will feel tight and may not be comfortable. Measure before buying; a pump with a wider cylinder is the better choice in that case.

How do I get a good seal?

Trim hair around the base so it doesn't break the seal, and spread a little water-based lube on the soft sleeve. Press the cylinder flat against your body before starting the motor. If you hear air leaking, release the valve, reposition and try again.

What powers the motor?

The supplier listing doesn't say whether it runs on batteries or a charger, so check the box and manual when it arrives. Either way, keep the motor unit dry and only wipe it clean.

How long should a session last?

Follow the time limits in the included user safety manual rather than any general rule. Start well below them, use gentle suction, and always release the vacuum with the valve. Stop at any pain, numbness or change in skin colour.

How do I clean the cylinder and sleeve?

Take the sleeve off, then wash both parts in warm, soapy water, rinse and let them dry in the air. Avoid scouring pads and alcohol on the acrylic, which can scratch or cloud it. Our toy cleaning guide covers storage too.

Recently viewed products