Popular searches
Trending now Best sellers
Shop by category
The XR Plungers Extreme are silicone nipple suckers for people who want more than a tip-only squeeze. Each one has a wide 1.6-inch opening, so it covers the nipple and a good part of the areola, and a push-down plunger draws the skin up into the cup and holds it there. Leave them on through foreplay, or pop them off whenever you want hands or a mouth on the area instead.
Instead of a soft bulb you pinch, these have a push mechanism. Pressing the top forces air out of the chamber, and when you ease off, the cup grips. XR lists the materials as silicone, ABS plastic and metal, and the build feels more like a piece of kit than a novelty. The hold is steadier than a small squeeze bulb, which makes them a sensible next step once simple suckers start to feel tame.
Wipe the skin so there's no lotion or sweat around the areola, then smear a thin layer of water-based lube around the rim; XR recommends it for a tight seal. Centre the opening over the nipple and keep the cup flat against the chest. Press the plunger part of the way, let go gently and see how it feels before pressing harder. To take one off, slide a fingertip under the edge to let air in rather than pulling it straight up.
Because the body is silicone, XR says these suckers are not compatible with silicone lubricants. Use a water-based formula instead. It's also easier to rinse off the skin afterwards, and you only need a small amount on the rim, not inside the cup.
The name refers to the width. With a 1.6-inch opening and 0.75 inch of depth, the cup is broad and fairly shallow, so it pulls on a wider patch of skin than a narrow cylinder does. If your nipples are small or you'd like a narrower, deeper pull, the XR Clear Plunger Small has a 1.2-inch opening and 1 inch of depth. Each Plungers Extreme cup measures 2.5 inches across and stands about 1.75 inches tall, so they're for play rather than wearing under a top.
A wide cup works on more skin at once, so build up slowly. Wear them for a few minutes, take them off, then reapply with a little more pressure if you want it. A partner can tug the cups gently, tap them, or remove one at a time and use a mouth or fingers on the uncovered side for contrast. Remove both straight away if anything goes numb, aches or changes colour.
Wash with warm water and mild soap, working the plunger under the tap so water moves through the chamber. Rinse the same way, shake out the water and leave them upside down until fully dry. Store them in a pouch; silicone picks up lint and dust.
Browse more suction and clamp styles in nipple clamps and suckers or see the full XR range.
Helpful answers about XR Plungers Extreme Silicone Nipple Suckers.
XR states that these silicone suckers aren't compatible with silicone lubricants, which can break down a silicone surface over time. Stick to a water-based lube; a thin layer on the rim is all you need for a tight seal.
It's 1.6 inches across with 0.75 inch of depth inside the cup, wide enough to take in the nipple and part of the areola. If you'd prefer a narrower, deeper fit, XR's Clear Plunger Small has a 1.2-inch opening and an inch of depth.
They can be if you press the plunger all the way the first time. Press only part-way, see how it feels for a minute or two, then reapply with more if you want it. Many people start with a small squeeze-bulb style and move up to these.
Not really. Each cup is 2.5 inches across and stands about 1.75 inches off the skin, so they show through anything fitted and can get knocked loose. Keep them for the bedroom or for a scene where they're meant to be seen.
Yes, and many couples prefer it that way. Agree on a word or signal for "take them off" first, especially if they'll stay on during a longer scene. Our BDSM guide covers check-ins and safe words.
Check three things: a dry rim (add a drop of water-based lube), a tilted cup (keep it flat to the chest) and lotion or hair around the areola, which can break the seal. Wiping the skin clean before you apply them usually solves it.
Hold the cup under warm running water with a little mild soap and pump the plunger a few times so water flushes through. Rinse with clean water the same way, shake out the drops and leave them upside down to dry fully before storing.