Kiiroo Vacuum-Lock Dildo

The Kiiroo Vacuum-Lock Dildo is a silicone vac-u-lock dildo made to clip onto the Kiiroo Keon through its dildo adapter, turning the stroker's motor into a hands-free thrusting setup. Take it off the adapter and it's a well-proportioned 7.5-inch dildo you can use on its own. It suits Keon owners who want to share their machine with a partner, and anyone who likes a smooth, mid-size silicone toy.

What the vacuum-lock fitting does

In the base is a vacuum-lock socket, the same style of fitting used across vac-u-lock accessories. It slides over a matching plug and holds by suction and friction, so the dildo stays firmly on its attachment yet comes off with a pull when you're done. Kiiroo designed it to pair with the Keon Dildo Adapter, an accessory that fits the Keon's motor and is sold separately. With the adapter, the Keon's stroking motion drives the dildo, so it works like a compact sex machine you can run manually or with Kiiroo's interactive content. Without the adapter, the dildo is simply a dildo: hold it by the base and use it however you like.

Size and feel

The dildo is 7.5 inches long with a 1.85-inch diameter, which puts it on the fuller side of average. That girth gives a satisfying stretch for people already comfortable with mid-size toys, while the length leaves room for a good grip on the base during handheld use. It weighs 193 grams, light enough to handle easily. If you're newer to penetration, warm up with fingers or a slimmer toy first and use plenty of lube, because 1.85 inches is a noticeable width.

Using the vac-u-lock dildo on the Keon

Attach the Keon Dildo Adapter following Kiiroo's instructions, then press the dildo's socket down onto the adapter's plug until it sits flush. Add generous water-based lube before you start. Begin at the slowest speed and shortest stroke while you find the right distance and angle, and keep the Keon on a stable surface. Stay within reach of the controls so you can stop or slow it at any moment. When you're finished, pull the dildo off firmly and wash it straight away.

Harness use

Kiiroo doesn't describe this dildo as harness compatible, and its base is a socket rather than a flared flange. If your harness uses a vac-u-lock plug, it can attach that way. A standard O-ring harness relies on a wide base, so check yours before planning strap-on play with it. The same applies to suction mounts and other bases: it needs a matching vac-lock plug to attach, as there's no suction cup on the dildo itself.

Silicone care

It's made from silicone, which is non-porous and easy to keep clean. Wash it with warm water and mild soap or a toy cleaner before and after use, and pay attention to the inside of the vacuum-lock socket, where lube collects. Let it dry fully before storing. Use water-based lube; silicone lube can wear down silicone toys.

Specifications

• Brand: Kiiroo
• Type: silicone dildo with vacuum-lock fitting
• Compatible with: Kiiroo Keon Dildo Adapter (sold separately)
• Material: silicone
• Length: 7.5" (190.5 mm)
• Diameter: 1.85" (47 mm)
• Weight: 193 g without box
• Box size: 7.95" x 2.76" x 2.72"

See the full Kiiroo range, compare sex machines, or read our dildo buying guide.