Your Cart

🚚 Discreet delivery across Canada🎁 Free gift on $100+ orders

The Blush VX6 is a manual penis pump built around a clear cylinder and a brass pistol-grip hand pump with a pressure gauge. It suits someone who wants to see exactly how much vacuum they're using, rather than squeezing a rubber bulb and guessing. The gauge, the brass trigger and a quick-release valve are what separate it from the basic bulb pumps at the entry level of the Blush Performance range.

What's in the box

You get an airtight clear cylinder about 9 inches long and 2 inches wide, a length of silicone tubing, and the brass pistol pump with its vacuum gauge and quick-release valve. The tubing connects the pistol to the end of the cylinder. The cylinder can be detached from the tubing while it's holding suction, so you aren't tethered to the hand pump the whole time. Blush says the parts contain no fragrances, phthalates, paraffins or latex.

How to use a vacuum pump

Preparation makes the seal work:

  • Trim pubic hair around the base, since hair lets air leak in.
  • Smear a little water-based lube around the rim of the cylinder and at the base of the penis.
  • Press the cylinder firmly against the body so the rim sits flat.
  • Squeeze the trigger slowly, a few pumps at a time, and watch the needle.

Keep the pressure low on your first sessions and stay well within the time limit in the instructions that come with the pump. The quick-release valve sits where your thumb can reach it; press it and the vacuum lets go at once. Use it whenever you want to stop, and always before taking the cylinder off.

Using it safely

Pumping should never hurt. Release the vacuum straight away if you feel pain, numbness or coldness, or notice the skin turning dark or blue. Don't use a pump while drunk or drowsy, and don't fall asleep with the cylinder on. Anyone with a bleeding disorder, who takes blood-thinning medication or who has a medical condition affecting the penis should speak to a doctor before using any vacuum device. Tiny red spots on the skin are a sign the pressure was too high; give yourself a break and use less next time.

Fit and compatibility

The cylinder is listed at 2 inches wide. For comfort, there should be a little room between you and the wall of the cylinder; if you're close to that width, a wider cylinder will seal more evenly. Blush designs the VX6 parts to be interchangeable with its other Performance pumping accessories, so the brass pistol and gauge can be used with a different cylinder later.

Cleaning

Separate the cylinder from the tubing and wash it in warm water with mild soap. Don't run water through the gauge or pistol; wipe those with a damp cloth instead. Let everything dry fully before reconnecting the parts, and store the pump somewhere the tubing won't kink.

Specifications

  • Brand: Blush, Performance VX6
  • Type: manual vacuum pump with pistol grip
  • Cylinder: clear, airtight, about 9 in long × 2 in wide; detachable
  • Pump: brass pistol grip with vacuum pressure gauge and quick-release valve
  • Tubing: silicone
  • Maker states: no fragrances, phthalates, paraffins or latex
  • Compatibility: interchangeable with Blush Performance pumping accessories

Prefer something motorised? Compare the Blush VX10 Smart Pump, see all penis pumps, or read our guide to male sex toys.

Helpful Information

Frequently Asked Questions

Helpful answers about Blush VX6 Vacuum Penis Pump with Brass Pistol Gauge – Clear.

How do I use a penis pump for the first time?

Trim the hair at the base, add water-based lube around the cylinder rim, press it flat against your body and pump slowly while watching the gauge. Keep the pressure low, keep the session short, and press the quick-release valve the moment anything feels uncomfortable.

What does the pressure gauge do?

It shows how much vacuum is inside the cylinder. That lets you repeat a level that felt comfortable instead of guessing, and it warns you before you pump too hard. Start low and increase gradually over several sessions.

Can I take the pistol off while the cylinder is on?

Yes. The cylinder detaches from the tubing while holding suction, so you can move more freely. Reconnect the pistol and use the quick-release valve to let the vacuum out before removing the cylinder.

Which lube should I use with a vacuum pump?

A thick water-based lube on the rim of the cylinder and around the base helps make an airtight seal. Water-based lube also rinses off the cylinder and tubing easily. Avoid numbing creams, which can hide warning signs that the pressure is too high.

Will the VX6 cylinder fit me?

The cylinder is listed at about 9 inches long and 2 inches wide. Measure your girth and leave some space between you and the cylinder wall. If you're close to 2 inches across, a wider cylinder will be more comfortable.

Can I use other Blush cylinders with this pump?

Blush says the VX6 parts are interchangeable with its other Performance pumping accessories, so the brass pistol and gauge can be paired with another compatible Blush cylinder. See the Blush range for other Performance pieces.

Recently viewed products