Tenga 3D Pile Male Masturbator

The Tenga 3D Pile is a reusable male masturbator from Tenga's sculptural 3D series, built from layer upon layer of small triangular points. Near the base they're packed tightly together for a soft, fine sensation; toward the tip they spread apart and the feeling turns into strong, rippling bumps. That gradient is the whole idea, and it means the sensation shifts as you go deeper. It turns inside out to use and to clean, and it stands on its own display stand between sessions.

A texture that changes as you go

Look at the 3D Pile out of the box and the pattern is on the outside, like a piece of sculpture. Those stacked triangles become the lining once you turn it inside out. Where the points sit close together, they create a dense, almost velvety feel. As the spacing widens, each point presses in more individually, and the sensation becomes a firmer, bulging stimulation. Shallow strokes keep things soft; full strokes take you through the whole range from fine to bold. Compared with the gentler, wavy Tenga 3Dx ZEN, the Pile is the more varied and intense of the two.

How to use the Tenga 3D Pile

Lift off the clear top case, take the sleeve off its stand and turn it inside out so the triangles face in. Lubricate the inside and the entrance well; there's a sample of lube in the box to get you started, and Tenga recommends its own Hole Lotion for later sessions. Ease in slowly. The material is extremely stretchy, so it adapts to you, and you can vary the pressure by changing how hard you grip the outside. Add lube whenever you feel any drag.

Size and stretch

At rest it's small: 48 x 48 x 116 mm, and 279 g. Tenga says the sleeve stretches to an insertion length of roughly 240 mm and a width of about 70 mm, so it accommodates a wide range of sizes, though very long users will stretch it more and feel the texture differently than shorter users. It's light enough to hold one-handed and small enough to store discreetly.

Cleaning and drying

The inside-out design makes cleaning easy, because every part of the texture is visible. Rinse it thoroughly under warm running water, turning it inside out; a mild, neutral soap is fine. Then place it back on its stand with the pattern facing outward so air reaches every surface. Only once it's fully dry should you replace the clear cover. Rushing this step is the most common reason strokers develop odours.

Materials and lube

The sleeve is made from what Tenga calls Ag antibacterial elastomer, while the tray and stand are ABS plastic. Use a water-based lube, which rinses out cleanly and won't harm the elastomer. The included sample contains water, glycerin and a short list of thickeners and preservatives, plus fragrance, so check the label if you're sensitive.

Specifications

• Brand: Tenga, 3D Pile
• Type: reusable male masturbator, inside-out sleeve
• Materials: sleeve, Ag antibacterial elastomer; tray and stand, ABS
• Size at rest: 48 x 48 x 116 mm
• Stretches to: approx. 240 mm insertion length, approx. 70 mm insertion width
• Weight: 279 g
• Includes: stand, clear cover, sample lubricant

Explore more strokers and sleeves and everything from Tenga, or read our male masturbator guide.