Clone-A-Willy Original Dildo Moulding Kit – Medium Skin Tone

The Clone-A-Willy Original in Medium Skin Tone lets you make a vibrating silicone copy of a real penis at home. This clone a willy kit comes with medium-toned platinum silicone, moulding powder, a tube and a vibrator, so the finished toy matches the shape of the original in every detail. It's a fun project for couples and a lasting keepsake for partners who spend time apart.

How a penis moulding kit works

The process has two stages. First, you make a mould: the algae-based moulding powder is mixed with water and poured into the moulding tube, then the penis goes in and stays still while the mixture sets around it, capturing every vein, curve and detail. Next, you mix the silicone and pour it into that mould, add the vibrator so it sits in the centre, and leave it to set. Once it's firm, you cut away the mould and trim the edges, and you're left with a silicone replica that vibrates. The included instructions give the exact temperatures, ratios and timings, and the disposable thermometer is there so the water is right for the moulding mix.

Before you start: what you'll need

The kit includes the platinum silicone, moulding powder, a 10.8 x 2.5 inch moulding tube, a single-speed vibrator, a stir stick, a disposable thermometer and step-by-step instructions. You'll also need a few things from home: scissors, a mixing bowl and utensils, a disposable bowl or cup for the silicone, and a cardboard square to hold the vibrator in place while the silicone sets. Read the instructions all the way through before you mix anything, because the moulding stage moves quickly once the powder meets water. Set everything up on a covered table within arm's reach.

Size: who the Original kit fits

The Original is made for an average-sized penis. If the penis being cloned is over 7 inches long or thicker than average, Clone-A-Willy says you may need an XL vibrator and extra silicone, and the 2.5-inch-wide tube leaves limited room around a very girthy shaft. Measure length and girth before you start, and check those figures against the tube size.

Tips for a good clone

The hardest part for most people is staying fully erect and still while the mould sets. It helps to make this a couples activity: a partner can keep things exciting, hold the tube steady and keep an eye on the clock. If you lose firmness, gently push in until the mould has set enough to hold its shape rather than pulling out. Afterwards, be patient while the silicone sets, since disturbing the silicone too early can leave marks or air pockets.

Using and caring for your clone

The finished dildo is 100% platinum silicone, so use it with water-based lube only. Wash it with warm water and mild soap or a toy cleaner, keeping the vibrator end out of the water as the maker doesn't give a waterproof rating, and let it dry before storing. Many people make one as a keepsake, for long-distance couples, or simply to use a familiar shape during solo play.

Specifications

• Brand: Clone-A-Willy by Empire Labs, Original kit
• Type: DIY penis moulding kit for a vibrating silicone dildo
• Silicone: 100% platinum silicone
• Includes: silicone, algae-based moulding powder, moulding tube (10.8" x 2.5"), single-speed vibrator, stir stick, disposable thermometer, instructions
• Not included: scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square
• Fit: average size; over 7" long or extra girth may need an XL vibrator and extra silicone
• Silicone colour: Medium Skin Tone. Also in Light Skin Tone

See all Clone-A-Willy kits or browse more vibrating dildos.