Your Cart

🚚 Discreet delivery across Canada🎁 Free gift on $100+ orders

The XR Cyber Milker is an automatic stroker that does the work for you: a motor moves the textured sleeve along your shaft while it vibrates and warms up, and a phone mount on top holds your screen so both hands stay free. It is a large device with side handles rather than a discreet cup, and the main draw is getting stroking, vibration and heat in one unit.

What it does

Buttons on the side handles control three functions: six stroking modes, three vibration speeds and seven vibration patterns, which you can combine. The heater warms the sleeve to one of two settings, 37°C (98.6°F), around body temperature, or 42°C (107.6°F) for something noticeably warmer. The phone holder clamps devices from 55 to 85 mm across, so you can watch something or keep a video call going with a partner. Large phones in thick cases may not fit, so measure first.

Inside the sleeve

The inner sleeve is soft, stretchy, phthalate-free rubber. The entry is cushioned and the opening is tight, and inside are textured tunnels with nubs and grooves that rub along the shaft as the mechanism strokes. With 7.2 inches of insertion length, most users will have room to spare.

Getting started with an automatic stroker

Charge it fully by USB before the first session. Switch on the heat a few minutes ahead so the sleeve is warm when you begin. Use plenty of water-based lube at the entry and on yourself; XR doesn't name a lube type for the sleeve, and water-based is the safe default for rubber. Start with the gentlest stroking mode and the lowest vibration speed, then move up once you know how the sleeve grips.

Lying back with the device resting on the bed, or holding it by the handles, works better than gripping it between the legs. At 7.9 inches wide it is bulky, so a pillow under your forearms helps during longer sessions.

Water and cleaning

The Cyber Milker is rated IPX6, so it can take splashes and a rinse, but XR says it cannot be submerged. Keep it out of the bath and never hold the body under running water for long. To clean, remove the clear front cover to reach the sleeve, wash it with warm water and mild soap or a toy cleaner, and let everything dry fully before reassembling. The removable top cap keeps dust out between sessions.

Is it the right pick for you?

It suits people who want a hands-free, heated stroking device with a screen mount and have space to store a fairly large gadget. It is less suited to anyone who needs discretion or silence: any motorised stroker makes noise, and XR publishes no decibel figure. If you prefer a simple sleeve you control by hand, look at our strokers and sleeves, and compare other motorised options in the automatic stroker guide.

Specifications

  • Brand: XR
  • Functions: 6 stroking modes, 3 vibration speeds, 7 vibration patterns, heating to 37°C or 42°C
  • Phone mount: fits widths of 55–85 mm (2.17–3.35 in)
  • Materials: plastic and silicone case, phthalate-free rubber inner sleeve
  • Case size: 7.5 in long, 7.9 in wide
  • Insertion length: 7.2 in
  • Power: USB rechargeable
  • Water rating: IPX6 (splash resistant, not submersible)
  • Colour: black, white and blue

See all male masturbators, including more heated and automatic models.

Helpful Information

Frequently Asked Questions

Helpful answers about XR Cyber Milker Heated Vibrating Stroker with Phone Mount.

How hot does the Cyber Milker get?

The Cyber Milker heats its sleeve to one of two settings, 37°C (98.6°F) or 42°C (107.6°F), according to XR. The lower setting is close to body temperature, while the higher one feels distinctly warm. Turn the heat on a few minutes early so the sleeve is ready when you are.

Can you use the Cyber Milker in the shower?

The Cyber Milker is rated IPX6, so it handles splashes and rinsing, but XR says it cannot be submerged. A shower session is possible if the device isn't left under the stream, but never take it into the bath, and dry it off before you charge it.

What lube works with the Cyber Milker?

Use a water-based lube with the Cyber Milker. XR doesn't name a specific type for the rubber sleeve, but water-based gel is the safe choice for rubber and rinses out of the inner tunnels easily. Our masturbation lubes include thicker gels that last longer inside sleeves.

Will my phone fit the Cyber Milker mount?

The Cyber Milker phone mount adjusts from 55 to 85 mm (2.17 to 3.35 inches) wide. Most phones fall inside that range measured across their width, but large models in bulky cases may not. Measure your phone with its case on before you order, and remove the case if needed.

How do you clean the Cyber Milker?

To clean the Cyber Milker, take off the clear front cover to reach the inner sleeve, then wash the sleeve with warm water and mild soap or a toy cleaner. Let it dry completely before you close it up, and fit the top cap to keep dust out between sessions.

Is the Cyber Milker loud?

XR does not publish a noise level for the Cyber Milker. As a motorised stroker with vibration, it makes an audible mechanical sound, more than any manual sleeve would. If you share walls, put on some background audio and close the door, or choose a hand-held sleeve instead.

Is the Cyber Milker a prostate milker?

No, despite the name, the Cyber Milker is a penis stroker, not a prostate massager. It strokes, vibrates and warms the shaft only. If prostate stimulation is what you want, browse our prostate massagers, which are shaped for internal use instead.

Helpful Guides

Learn More Before You Choose

Expert guidance to help you choose, use and care for your products with confidence.

Recently viewed products