Popular searches
Trending now Best sellers
Shop by category
Gender X Double My Pleasure is a two-ended vibrating anal toy: a beaded plug on one side and a short, chunky mini-vibe on the other, each with its own motor and joined to a central handle by flexible cords. You can use one end on its own, use both on one person, or split them between two people. That choice is what sets it apart from a single plug.
The plug end is three round bulbs that get bigger as they go, finishing at a wide base that stops it going too far. It's about 3.1 inches insertable and around 1.3 inches across at its widest bulb, so it builds from a small tip to a comfortable fullness. The mini-vibe end is a similar size, about 3.25 inches long and 1.32 inches wide, but shaped differently: it narrows in the middle and ends in a flattened, blunt tip. That pinch at the centre helps it stay seated once inserted, and the flat tip makes it useful outside the body too, pressed against the perineum or clitoris.
Each motor is controlled separately. You can run the plug at a gentle level while the vibe end works harder, or switch one off completely. Between them there are eight speeds and functions.
Solo, the simplest start is the plug end alone, with the handle and the second end resting outside. Once that feels good, place the mini-vibe on the perineum or clitoris for two points of buzz at once. For couples, each partner can take an end, which works well for spooning or for mutual play where you are lying close. Because the cords flex, the two ends can point in different directions without pulling on each other.
Use plenty of lube, and go one bulb at a time on the plug end, pausing at each step so your body can relax around it. Turn the vibration on low before insertion rather than after, since steady vibration can make the first bulb easier to accept. Keep a firm hold on the handle when moving, and check the base sits flat against the body before you let go. Silicone toys pair most easily with water-based lube. Our anal play guide has more on pacing and positions.
A standard vibrating plug gives you one shape and one motor. Here you get two shapes that feel quite different: the beads give a popping sensation as each one passes, while the mini-vibe gives smoother, more even pressure. Having separate motors also means you can stop one end without losing the other, which is handy if one partner wants a break.
The USB charging plug is tucked under a screw-off cap on the textured handle, so there's no separate cable to lose. Screw the cap back on firmly before it goes anywhere near water. With the cap closed, Gender X says the whole toy is waterproof and submersible, which makes rinsing it under the tap or using it in the shower straightforward.
See the rest of the Gender X range or browse our anal vibrators.
Helpful answers about Gender-X Double My Pleasure.
It can be. Both ends are slim, around 1.3 inches across, and the plug end starts with a small bulb, so you can stop at whatever depth feels right. Take it slowly, use lots of lube, and begin with one end only.
Yes. Each end has its own motor and the cords between them are flexible, so partners can each take an end while lying close together. Because both ends share one handle, you need to stay fairly near each other.
Most people start with the beaded plug, because it builds gradually and the flared base stays put. The mini-vibe end, with its flat tip, also works externally, which is a gentle way to get used to the vibration first.
Use a thick water-based lube. Silicone lube can react with some silicone toys, so it's safer to avoid it here or test a small spot first. Reapply often, since anal play needs more than you'd expect. Browse water-based lubes.
There isn't a port in the usual sense. A USB plug is built into the handle under a screw-off cap. Unscrew the cap, plug it into a USB power source, and screw the cap back on tightly before using or washing the toy.
Gender X lists it as waterproof and submersible, provided the charging cap is fully closed. Water rinses lube away quickly, so in the shower a silicone-friendly water-based gel that clings a little longer is helpful.
Wash both ends, the cords and the handle with warm water and mild soap or toy cleaner, paying attention to the joins where the cords meet. Check the cap is tight first, then let everything air-dry before storing.