Popular searches
Trending now Best sellers
Shop by category
The Jock Helmet Humper is a hands-free male masturbator with two separate motors. One makes a chamber around the head of the penis gyrate; the other vibrates a textured sleeve along the shaft. A stretchy ring at the base keeps the whole unit on, so once it's in place you don't need to hold it.
Most powered strokers concentrate on the shaft. The Helmet Humper gives the head its own gyrating chamber, and you control each motor with its own side button. That means three ways to use it: head only for slow, focused teasing; shaft only for a steady buzz; or both at once. XR doesn't list how many speeds or patterns each motor has, so expect to explore by pressing through the buttons.
Try the head chamber on its own first. Gyration on the most sensitive area can feel intense, and starting there tells you how much you want before adding the shaft vibration. Switching the head motor off near the end and letting the shaft sleeve carry on is another way to slow things down.
There are three openings to know about. The base ring has a 1.6-inch inner diameter and stretches to hold the stroker at the base of the shaft. The head chamber opens to 1.6 inches. Inside the shaft sleeve, a flexible ring adjusts from 0.7 to 1.4 inches, so you can choose a loose sleeve or a tighter squeeze. Start at the looser end and tighten in small steps. Insertion depth is 5.6 inches, so longer shafts will reach the end of the chamber.
XR specifies water-based lube only. Add it to the sleeve and to the head chamber before you begin, and top up if the gyration starts to tug.
This suits people who like attention on the head and want to lie back without gripping a toy. It's also a good fit for anyone with limited hand strength or who finds manual strokers tiring. It's less suited to people who want a thrusting or sucking motion, or a realistic, open-ended sleeve; browse our male masturbators for those styles. And because it's splash-resistant rather than waterproof, it won't come into the shower. If you mainly want a stroker you can rinse completely in the sink, a non-electric sleeve is easier to live with.
It charges by USB and runs on a built-in lithium battery, so there's nothing to replace. After each use, rinse the silicone sleeve and chamber with warm water and toy cleaner, keeping the buttons and charging port away from running water. Shake out excess water, pat the outside dry and leave the openings facing down on a towel until the inside is fully dry. Then store it away from sunlight and apart from other toys.
Comparing powered options? Read our guide to automatic strokers, or browse more strokers and sleeves.
Helpful answers about Jock Helmet Humper Gyrating Vibrating Silicone Stroker – Black.
The Jock Helmet Humper uses two motors: one gyrates a chamber around the head of the penis, the other vibrates a sleeve along the shaft. Each has its own side button, so you can run either one or both. A stretchy base ring holds it on hands-free.
The Jock Helmet Humper has a 1.6-inch base ring and head opening, an adjustable inner ring from 0.7 to 1.4 inches, and 5.6 inches of depth. Most people fit comfortably, but longer shafts will reach the end. Start with the inner ring at its loosest setting.
Yes, the Jock Helmet Humper is hands-free once it's on. The stretchy base ring grips the base of the shaft and keeps the stroker in place while the motors run. You'll still need a hand to switch settings, since the buttons are on the side and there's no remote. Pick settings before lying back.
No, the Jock Helmet Humper is rated IPX5, which means splashproof rather than waterproof. Keep it out of the shower and bath. When cleaning, rinse the inside sleeve but keep the buttons and charging port away from running water. A damp cloth is enough for the outer shell.
Use a water-based lube with the Helmet Humper, as XR specifies for its silicone sleeve. Apply it inside the head chamber and along the sleeve before turning it on, and keep the bottle within reach. A thicker masturbation lube lasts longer against the gyrating motion.
Clean the Jock Helmet Humper stroker by rinsing the sleeve and head chamber with warm water and toy cleaner after each use. Shake out the water, wipe the shell and stand it openings-down on a towel to dry fully before storing. Trapped moisture is the main thing to avoid.
Expert guidance to help you choose, use and care for your products with confidence.