Your Cart
Best For:
- Solo exploration with dynamic internal motion
- Repeat use — reusable stroker with built-in drying stand
- All sizes — larger body, 40% thicker elastomer than original
- Beginner-friendly with straightforward operation
- Visual appeal — clear casing shows internal spiral mechanism
The SPINNER DX 03 STEPS from Tenga turns the traditional stroker inside-out with a spring-loaded internal coil that spins and contracts as you move. Continuous ridges arranged in a spiral staircase pattern create repeating edge sensations — each stroke activates the coil's rotation for dynamic, hands-free motion inside the chamber. The transparent casing lets you watch the mechanism work, adding visual interest to the tactile experience.
This DX edition upgrades the original SPINNER with 40% thicker elastomer and a larger body diameter, making it comfortable for a wider range of sizes without sacrificing the signature spinning action. The firmer material holds its shape better during use, while the internal coil still flexes freely to generate the twisting sensation. A vacuum effect at the tip adds suction with each downstroke, compounding the motion. The clear top grip lets you control stroke speed and pressure without interfering with the spinning mechanism.
Unlike disposable strokers, the SPINNER DX is designed for repeated use with included care tools. The base unscrews to reveal a ventilated drying stand — after washing, the stroker sits upright to air-dry between sessions. The hard case protects the elastomer during storage and keeps dust out. The coil is permanently embedded, so there's no assembly or maintenance beyond rinsing and drying. One operational note: the elastomer should never be turned fully inside-out, as this can damage the internal spring.
Key Features
- Spring-loaded internal coil spins during strokes
- Spiral staircase ridge pattern for repeating edge sensations
- 40% thicker elastomer and larger body vs. original SPINNER
- Clear casing shows internal mechanism in action
- Built-in drying stand and protective storage case included
- Reusable design — wash with water, air-dry, repeat
- Vacuum tip creates suction on downstrokes
How to Use
Apply water-based lubricant inside the chamber and at the entry point. Hold the top grip, squeeze to release air, then insert. Stroke up and down — the internal coil will spin automatically as the elastomer expands and contracts. After use, rinse with cool or lukewarm water (do not turn inside-out), pat dry, and place in the ventilated drying stand. Store in the case once fully dry.
Frequently Asked Questions
What makes the SPINNER DX different from disposable strokers? The SPINNER DX is fully reusable — it includes a built-in drying stand and protective case, and the thicker elastomer is designed to withstand repeated washing and use without degrading.
How does the spinning mechanism work? A spring-like coil is permanently embedded in the elastomer. As you stroke, the material expands and contracts, causing the coil to rotate and twist against the internal ridges for dynamic motion.
Can I use silicone-based lubricant with the SPINNER DX? No — stick to water-based lubricant only. Silicone or oil-based lubes can degrade the elastomer and damage the internal coil over time.
How do I clean the SPINNER DX without damaging the coil? Rinse thoroughly with cool or lukewarm water and pat dry. Never turn the stroker fully inside-out, as this will damage the embedded spring mechanism.
Does the SPINNER DX 03 STEPS ship discreetly to Canada? Yes — every order ships in plain, unmarked packaging with confidential billing.