Your Cart

🚚 Discreet delivery across Canada🎁 Free gift on $100+ orders

The XR Milker Mega-Pod is a sucking masturbator with a twist: the TPE sleeve inside is dual-ended, with a spiral groove at one end and layered ribs at the other, and you choose which end to use by fitting the suction unit to the opposite side. It offers 4 suction modes, a pocket for your own bullet vibrator and a hard case with caps that keeps the sleeve clean between sessions. It's compact enough to hold in one hand and store in a drawer.

Two textures in one sleeve

Pull off the end caps and you'll see two openings. The spiral end feels like a twisting grip as you slide in; the ribbed end gives a series of distinct rings. You enter one end and attach the suction unit to the other, then swap round next time for a different feel. Insertion depth is 4.5 inches. The TPE is soft and stretchy, so it suits a range of girths.

How the suction works

The suction attachment pulls air from the closed end of the sleeve, so the tunnel draws in and grips around you in rhythm. There are 4 modes to cycle through. Lube matters more than usual with suction: too little and the seal drags, too much and it slips. Start with a modest amount inside the sleeve, switch on the gentlest mode and adjust from there.

Adding a bullet vibrator

XR doesn't build vibration into this model, but the sleeve has a pocket that takes a small bullet vibrator. Slip one in before you start and you get buzzing on top of the suction. Check the size of your bullet against the pocket before buying one specially; a slim, short bullet is the safest fit. Our bullet vibrators include several compact options.

Who it suits, and who should look elsewhere

The Mega-Pod suits men who like a pulling, milking sensation more than stroking, and anyone who values easy cleaning and a case that keeps dust off. It's less suited to people who want the toy to move for them, since there's no thrusting; the Milker Max 14X does that. If you're longer than average, the 4.5 inch depth may feel short. On the other hand, the small size makes it one of the easier powered toys to hide away, and the case means it doesn't need a separate storage bag.

First session tips

Charge it fully first. Warm the sleeve by running it under warm water for a minute (with the suction unit detached), then dry the outside and add lube. Slide in before you switch on, so the suction seals around you rather than pulling at air.

Cleaning made simple

This is where the open-ended design pays off. Remove both caps and the suction unit and the sleeve becomes a tube you can rinse straight through with warm, soapy water. Rinse until the water runs clear, then let it air-dry fully with both ends open before closing the case. Keep the suction unit away from running water and charge it through any USB-C cable.

Specifications

  • Brand: XR
  • Functions: 4 suction modes
  • Sleeve: TPE, dual-ended (spiral and ribbed), bullet pocket
  • Case: ABS plastic with two removable caps
  • Case size: 6.1 x 2.9 in; 7.6 x 2.9 in with suction attachment
  • Insertion depth: 4.5 in
  • Power: rechargeable via USB-C
  • Lube: water-based only
  • Colour: black and clear

See how suction compares with other styles in our automatic stroker guide, or browse more male masturbators.

Helpful Information

Frequently Asked Questions

Helpful answers about XR The Milker Mega-Pod Sucking Male Masturbator.

How does the Milker Mega-Pod suction work?

The Milker Mega-Pod's suction unit attaches to the closed end of the sleeve and pulls air out, so the TPE tunnel grips and releases around you. There are 4 suction modes. Use a moderate amount of water-based lube, since a good seal depends on not flooding the sleeve.

Does the Milker Mega-Pod vibrate?

No, the Milker Mega-Pod doesn't have a built-in vibrator; it uses suction only. The sleeve does have a pocket for a small bullet vibrator, so you can add your own. Choose a slim, short bullet, and check that it sits snugly in the pocket before you start.

Which end of the Milker Mega-Pod sleeve should you use first?

Try the spiral end of the Milker Mega-Pod first if you like a twisting, wrapping feel, or the ribbed end for sharper, ring-like texture. Fit the suction unit to the opposite end. Swapping ends between sessions keeps the toy feeling different without buying a second sleeve.

How do you clean the Milker Mega-Pod?

Clean the Milker Mega-Pod by removing both end caps and the suction unit, then rinsing warm, soapy water straight through the open sleeve. Rinse until clear and leave both ends open while it air-dries. Store it in its case with the caps on only once it's completely dry inside.

How do you charge the Milker Mega-Pod?

The Milker Mega-Pod charges through a USB-C port on the suction unit, so any standard USB-C cable works. Detach the unit from the sleeve before charging and make sure the port is dry. Charging away from the sleeve also lets the TPE finish drying after cleaning.

Is the Milker Mega-Pod good for travel?

The Milker Mega-Pod travels better than most powered masturbators, because the 6.1 inch hard case with caps protects the sleeve from lint and keeps it closed in a bag. Pack it clean and fully dry. Bring a small bottle of water-based lube and a USB-C cable.

Helpful Guides

Learn More Before You Choose

Expert guidance to help you choose, use and care for your products with confidence.

Recently viewed products