Your Cart

🚚 Discreet delivery across Canada🎁 Free gift on $100+ orders

The Together NudeFit Adjustable Strap-On Harness is a soft, unisex strap on harness that fits waists up to 68 inches and comes with three silicone O-rings. It's made in three shades chosen to sit naturally against different skin tones; this listing is the Medium shade. A through O-ring design takes double-ended and heavier dildos, so it suits beginners and experienced wearers alike.

A strap on harness built to fit more bodies

Many harnesses top out well below what a lot of people need. The NudeFit adjusts to fit waists up to 68 inches, with long straps and an adjustable buckle you can set once and then lock in place. It's a unisex design, so it suits any wearer, and the soft materials mould to the body instead of sitting stiffly on top of it. That makes it more comfortable to wear, quicker to put on and easier to take off. The locking mechanism keeps the fit from loosening as you move, which is what stops a dildo from drooping or wobbling mid-session.

Matching the O-ring to your dildo

Three silicone O-rings come in the box, and they swap in and out of the front panel:

  • Small: 1.25 inches diameter, 4 inches circumference
  • Medium: 1.75 inches diameter, 5.5 inches circumference
  • Large: 2 inches diameter, 6.5 inches circumference

To choose, wrap a soft tape measure around your dildo's shaft just above the base and pick the ring closest to that measurement. You want the ring to grip snugly while the base sits flat behind it. The dildo needs a flared base wider than the ring, or it will pull through. Silicone rings have a little give, so a slightly tight fit is better than a loose one.

Through-ring design for double-ended dildos

The NudeFit uses a through O-ring, which means the ring is open at the back as well as the front. That lets a double-ended or strapless-style toy pass through, so the wearer can have one end inside while the other end is used on a partner. The open design also helps heavier dildos sit securely, because the base is supported by the panel and ring rather than just pinched at the front. If you've been looking for a double ended strap on setup that doesn't need a special harness, this is a straightforward option.

Putting it on and caring for it

Fit the O-ring and dildo first, then step into the harness and tighten the straps evenly so the front panel sits over the pubic bone, not too low. Check that the dildo points where you want it before you start, and readjust if it tilts down. Afterwards, remove the dildo and O-ring, wash the rings in warm soapy water, and spot-clean the vegan leather and fabric with a damp cloth and mild soap. Let everything dry fully before storing it flat. Keep the spare O-rings in a small bag with the harness so they don't go missing between uses.

Specifications

  • Brand: Together, NudeFit
  • Type: adjustable unisex strap-on harness with through O-ring
  • Fit: waists up to 68 inches, adjustable buckle and locking mechanism
  • Materials: polyester, PU vegan leather, POM, silicone O-rings
  • O-rings included: 3 (Small 1.25", Medium 1.75", Large 2" diameter)
  • Dildo: not included
  • Shade: Medium

Pick a toy from our harness-compatible dildos, see more strap-on harnesses, or read our guide to double-ended dildos.

Helpful Information

Frequently Asked Questions

Helpful answers about Together NudeFit Adjustable Strap-On Harness – Medium.

Does the Together NudeFit come in different sizes?

No. The Together NudeFit is one adjustable size that fits waists up to 68 inches. The Medium in this listing refers to the shade, one of three skin-tone colours, not the fit. Tighten the buckle to suit smaller waists.

How do I use a strap-on harness like the NudeFit?

Choose the NudeFit O-ring that matches your dildo, push the dildo through from the back, then step into the harness and tighten the straps so the panel sits over the pubic bone. Use plenty of lube and start slowly. Our harness-compatible dildos all have flared bases.

Can I use a double-ended dildo with the Together NudeFit?

Yes. The NudeFit's through O-ring is open behind as well as in front, so a double-ended dildo can pass through with one end inside the wearer. Choose a ring that grips the middle of the toy firmly, and check it stays put before you start.

Will my dildo fit the Together NudeFit harness?

Most dildos with a flared base will fit the NudeFit. Measure the shaft's circumference just above the base and match it to the rings: 4, 5.5 or 6.5 inches. If the base is narrower than the ring, the dildo will slip through.

Is the Together NudeFit harness vegan?

Yes. The NudeFit uses PU vegan leather rather than animal leather, along with polyester, POM hardware and silicone O-rings. That also makes it lighter and easier to wipe clean than many leather harnesses.

How do I clean the Together NudeFit harness?

Remove the dildo and O-ring, then wipe the NudeFit's vegan leather and straps with a damp cloth and mild soap. Wash the silicone rings in warm soapy water. Air-dry everything fully before storing, and don't put the harness in the washing machine.

Helpful Guides

Learn More Before You Choose

Expert guidance to help you choose, use and care for your products with confidence.

Recently viewed products