XR The Milker Intense 13X Sucking Male Masturbator

The XR The Milker Intense 13X is an automatic male masturbator that does the work with suction rather than a motorised stroke. You hold the case, slide in, and let a pulling sensation build around the shaft while vibration rumbles through a nubbed sleeve. The "13X" is simply the sum of its settings: three suction modes, three vibration speeds and seven vibration patterns.

Two ways to use the suction

There are two suction buttons, and they behave quite differently. The Tornado button (the icon looks like a small swirl of circles) steps through three preset sucking modes each time you press it, so you can pick a rhythm and let it run. The Manual button (a finger pointing at a circle) works only while you hold it down: keep your thumb on it and the pull grows gradually, let go and it eases off. Manual mode suits anyone who wants to build intensity slowly or hold it at one level near the end, while Tornado is the hands-off option.

Vibration and the nubbed sleeve

Vibration runs separately from the suction, with three speeds and seven patterns. Because the motor sits behind the textured inner sleeve, the nubs vibrate along with it, so the texture feels busier than it would in a plain manual stroker. You can keep the toy still and let suction and vibration do everything, or move it up and down by hand for a mix of stroke and pull.

Will this automatic male masturbator fit?

The case is about 9.3 inches long and 3.5 inches wide, and the tunnel takes up to 6 inches of length. If you're longer than that, the head and upper shaft get the attention while the base stays outside, which many people don't mind. The sleeve is soft and stretchy, so girth is less of an issue than depth, but the opening still needs a generous amount of lube to slide in comfortably.

Setting it up the first time

Charge it fully before the first session. Switch it on, put a little water-based lube on yourself and a few drops inside the sleeve, then ease in before you start any setting. Begin with vibration on a low speed, then add the first Tornado mode once you're comfortable. Suction feels strongest when the opening forms a good seal, so a little extra lube around the entrance helps.

Cleaning and charging

The inner sleeve pulls out of the case, which is the main reason this one is easier to live with than a sealed unit. Ease it out gently, wash it with warm water and mild soap (or a toy cleaner), rinse, and pat it dry before letting it air-dry fully. Wipe the case down separately and keep water away from the charging port. Charging uses the included USB cable with a magnetic end that clicks onto the port.

Specifications

• Brand: XR Brands, The Milker range (packaging and photos show the LoveBotz Auto Milker Intense name)
• Type: suction and vibrating stroker, hands-free
• Materials listed: TPE, ABS plastic and silicone; nubbed, phthalate-free stretchy sleeve
• Settings: 3 suction modes (Tornado), hold-to-build Manual suction, 3 vibration speeds, 7 vibration patterns
• Case: about 9.3 in long, 3.5 in wide
• Insertable depth: up to 6 in
• Power: rechargeable, USB cable with magnetic connector included
• Lube: water-based only
• Colour: black and blue

Comparing hands-free options? Our guide to automatic strokers walks through the differences, or browse all male masturbators.